OFF-SHORE USES
(Total concentration - 300 PPM BASED ON TOTAL FLOW/VOLUME)
- 1. Well Stimulation (bullhead the well to push out Glochem 3000 around near wellbore in perforation zones to increase production).
- 2. Production Well (continuous downhole injection via the backside of the well). The most preferred injection point is the furthest point upstream.
- 3. Pipelines (injection points can be established at any point along the pipeline to reduce and eventually remove legacy build up, lower pressures and wetting the infrastructure, as a bonding film forms to provide a reduction in drag).
- 4. On-Board Oil & Water Storage Tanks (tank cleaning can be expedited by adding 300 PPM based on the current settled bottom volume and begin circulating the tank, while continuing to produce into the tank with 300 PPM injected at the inlet point. Heavies will resuspend in the oil phase, gases are released to the top of the tank, water falls out below the oil and sands fall to the bottom of the tank for future removal once the tank has been emptied and degassed prior to entry).
- 5. Transportation Vessels (Sea vessels will be thoroughly cleaned by having oil with traces of Glochem 3000 in the oil during transport).
- 6. Injection Wells (Glochem 3000 is water soluble and so the majority of the 300 PPM concentration will remain in the water phase to be pushed back into the formation via the injection wells to keep them clean and free flowing, and to promote the 4-part separation in the formation).
Well Stimulation
Cleaning the formation and wellbore, thus stimulating increased well production naturally.
Production Well
Resuspends wax and bicarbonate, while eliminating buildup on all metal surfaces with the steady injection of 300 ppm based on flow-rates.
Underwater Pipelines
Resuspends and removed legacy wax, therefore reducing corrosion and drag for increased flow-rates.
Over-Boarding Water Safely
Environmentally friendly, while exceeding all international water over-boarding and dumping regulations.
Transportation Vessels
Sea vessels cleaned with traces of Glochem 3000 in the oil during transit, assisted by the motion of the seas.
Water Injection
Cleans and sweeps formation while increasing oil recovery.
Well Program
Resuspends wax and bicarbonate, while eliminate buildup on all metal surfaces
Well Stimulation
Cleaning the formation and wellbore, thus stimulating increased well production naturally
Pipeline
Resuspends wax and bicarbonate, while eliminate buildup on all metal surfaces
Processing Plants
Cleans facilities, increases efficiency, reduces maintenance and downtime
Storage Tanks
Cleans tanks online, re-suspends tank bottoms to be sold and significantly reduces downtime, while eliminating hazardous manned vessel entry
Transportation Vessels
Cleans vessels while increasing loading and unlading times
Oil & Water Retention Pond
Recovers all hydrocarbons, environmentally friendly, non-toxic, non-acidic and non-corrosive
Injection Wells
Cleans and sweeps formation while increasing oil recover
SAGD
Increases efficiency of steam to increase oil recovery and sweeps formation
Off-Shore Platform
Resuspends wax and bicarbonate, while eliminate buildup on all metal surfaces
Over-Boarding Water Safely
Environmentally friendly, while exceeding all international water over-boarding and dumping regulations
